Daktronics OMNISPORT 2000, Operation Manual

Page: 53 / 182

Swimming Mode Menus & Settings
43
Edit Team Score
This menu is used to manually edit up to 4 team scores for
display on auxiliary team score scoreboards. The asterisk (*)
identifies which team score is selected.
H 000* G1 000
G2 000 G3 000
From 1-TEAM SCORE – [ENTER] or from Main Menu – [2]>[1]
Enter a score of 0 to 999 using the [0]–[9] keys. The asterisk (*) flashes to indicate the score
is ready to enter. Press [ENTER] on the last score to post the scores to the scoreboard and
advance to the Edit – Event Order Menu . To exit without saving the data, press [CLEAR] .
Some operators will use the four scores (H, G1, G2 & G3) as HOME and GUEST for men
and women or HOME and GUEST for varsity and junior varsity. Another option is to post
the men’s scores when a men’s event is finished, and the women’s scores when a
women’s event is finished.
Note: If the console is connected to Hy-Tek MEET MANAGER, it is not possible to
automatically update the team scores in the console when the team scores in
MEET MANAGER are updated.
When to use this:
• Typically team scores are updated on the scoreboard after each event is finished
and scored.
Edit Event Order
The Event Order menu is where the operator can choose
one of the menus described below to edit the event order,
insert an event into the event order, delete an event in the
event order, or clear the event order entirely. Remember
that the operator has three options to manage the event
order. Refer to Event/Heat (p.26) .
Edit Order
This group of menus is used to manually enter a basic event
order in the OmniSport 2000 timing console.
EDIT EVENT ORDER
#001* E:001 R:
From Main Menu – [2]>[2]>[1] or from 1-EDIT ORDER – [ENTER]
The OmniSport 2000 timer holds up to 500 events in numbered locations. The locations
allow the events to be entered in any order (example: event 001, 012, 035). An alpha
character (A-Z) may also be added (example: 001A). Event locations have been
numbered from 1 to 500. The asterisk (*) indicates it is OK to press [ENTER] and begin to
edit this event location. Use [↑][↓] to select the event location number. Press [ENTER] when
the location number to be edited is shown. Press [CLEAR] to return to the menu selection.
Continue through the Event Order settings by pressing [ENTER] after each setup. Press the
[0]–[9] keys to change the event number. Use [←][→] to set the event’s alpha designator
and press [ENTER] to accept. Use [←][→] to change the round type (final, semi-final,
prelim, blank), then press [ENTER] to accept.
MENU-EDIT
1-TEAM SCORE
From Edit Menu [ENTER] or [2]
H 089 G1 085
G2 000* G3 000
MENU-EDIT
2-EVENT ORDER
From Main Menu – [2]>[↓]
MENU-EVENT ORDER
1-EDIT ORDER
From Main Menu – [2]>[2]