Daktronics OMNISPORT 2000, Operation Manual

Page: 141 / 182

Track Mode Menus & Settings
131
Football SCBD
This setting determines if Event/Heat or Guest 2/3 will be
displayed on the TO GO and BALL ON digits on the bottom
of a on the bottom of a Football/Track scoreboard.
FOOTBALL SCBD
SHOW-EVENT/HEAT*
From Main Menu – [4]>[2]>[1]>[5]
FOOTBALL SCBD
SHOW-GUEST 2/3 *
Use [←][→] to select the desired choice. Press [ENTER] to save.
Running Time
This menu sets what data is displayed on a single line
numeric scoreboard.
SING LINE DISP
RT= CONTINUOUS*
From Main Menu – [4]>[2]>[1]>[6]
SING LINE DISP
RT= FINISH *
Use [←][→] to select either CONTINUOUS running data or the FINISH scores. Press [ENTER]
to save.
Setup RTD/Matrix Scoreboard Menu
Number of Lines
This menu sets the # of Lines of lane data being sent to the
matrix display. If the number of lanes on the track is greater
than the value set, the timer will automatically page the
information in place order. The default setting is 10.
# OF LINES
LINES= ^8
From Main Menu – [4]>[2]>[2]>[1]
Press the [0]–[9] keys to enter the number of lines appropriate to the facility’s display and
then press [ENTER] to save.
Finish Page Time
This menu configures how long (0 to 99 seconds) each page
of the Finish Times will hold on the display.
FINISH PAGE TIME
TIME: ^5*
From Main Menu – [4]>[2]>[2]>[2]
Press the [0]–[9] keys to enter the appropriate length of time the finish time will appear on
the display and then press [ENTER] to save. The default time is 5 seconds.
Results Order
This menu configures the console to display results in either
Lane Order (default) or Place Order . If the number of lanes
in the pool is greater than the number of lines configured
for the display, the timer will display the information in place
order regardless of this setting.
MENU-NUMERIC
5-FOOTBALL SCBD
MENU-NUMERIC
6-RUNNING TIME
MENU-SCOREBOARD
2-RTD/MATRIX
MENU-RTD/MATRIX
1-# OF LINES
From Main Menu – [4]>[2]>[2]
MENU-RTD/MATRIX
2-FIN PAGE TIME
MENU-RTD/MATRIX
3-RESULTS ORDER