Daktronics OMNISPORT 2000, Operation Manual

Page: 119 / 182

Water Polo Mode Operation, Menus, & Settings
109
• It is toggled off in the menu. When it is toggled off, the current results will go back on
the scoreboard.
When to use this:
• Any time the console is reset and the operator wants to just display Time-of-Day on
the scoreboard. This might be during a break in the game.
Print Menu
Print Settings
This menu is used to print the console’s configuration.
MENU-PRINT
PRINT SETTINGS?
From Main Menu – [2]>[1]
Press [YES] to print the settings. Press [NO] to exit the menu without printing.
Paper Feed
Press [ENTER] to advance the paper. The printer will not print on the advanced lines.
MENU-PRINT
2-PAPER FEED
From Main Menu – [2]>[ ↓]
Setup Timer Menu
This menu is used to configure the game settings.
Set Times
These menus establish the times used while playing the
game from overtime minutes to the number of timeouts
allowed for each team.
Note: For each of the following menus, set the time length pressing [0]–[9]>[ENTER] .
Press [CLEAR] twice to leave this setting as is and exit to the TIMER menu.
Period Time
This menu sets the period time for the game.
MENU-SET TIME
PERIOD: 04:22*
From Main Menu – [3]>[1]>[1]>[1]
Overtime
This menu sets the minutes to be played during overtime.
MENU-SET TIME
OVER: 03:00*
From Main Menu – [3]>[1]>[1]>[2]
MENU-MAIN
2-PRINT MENU
MENU-PRINT
1-SETTINGS
From Main Menu – [2]
MENU-SETUP
1-TIMER
From Main Menu – [3]
MENU-TIMER
1-SET TIMES
From Main Menu – [3]>[1]
MENU-SET TIME
1-PERIOD TIME
MENU-SET TIME
2-OVER TIME