FLR3-1500 and FLD3-2000 Handheld Controller
40
About
1�
Press the
MENU
key followed by
ENTER
to select the
Diagnostics Menu
.
2�
Press the
Down Arrow
key to reach
About
.
LCD Screen
Action/Information Shown
ABOUT
ENT TO VIEW
ABOUT ] FIRMWARE
DD-2256160 4.8
ABOUT ] FUNCTION
GAS PRICE
Press
ENTER
to view the About menu.
The DM-100 toggles between Firmware and Function information.
Press
ENTER
at any time to exit the About menu.
Dimming
1�
Press
DIMMING
on the keypad. The current setting is shown on the bottom line of the
LCD. The dimming level of the display is adjusted in one of two ways:
• Automatic Dimming uses a light sensor inside each display to detect the level of
ambient light at the display location and dim the LED brightness accordingly.
• Manual Dimming retains the same LED brightness level regardless of the level of
light detected at the display.
2�
Refer to the following tables to set the dimming level:
LCD Screen
Action/Information Shown
DIMMING
AUTOMATIC }
DIMMING
MANUAL }
DIMMING
BLANK SIGN }
Press the
Down Arrow
key to toggle through dimming settings:
•
Automatic
– The display automatically dims based on the
light detected at the display.
•
Manual
– The display dimming level is set manually. Once
set, this value remains the same regardless of the light
level detected at the display.
•
Blank Sign
– Briefly clears all content from display.
When
AUTOMATIC
dimming is selected, the following prompt appears:
LCD Screen
Action/Information Shown
SET AUTO DIMMING
MAX INTENSITY?
Press the
ENTER/EDIT
key to edit the maximum intensity that
the display uses in full-bright modes (during daylight hours).
Press
CLEAR
to keep the current auto dimming maximum
setting.
