FLXR3 Server and Client Radio Installation
Procedure Quick Guide
DD3306966
Rev 04
03 September 2019
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 7
Server Radio Kit
Letter Component Type
A
Pole-Mount Hardware
B
Wall Pack Transformer
C
Antenna Extension Cable - 50'
D
DIN Rail Mount/Track
E
900Mhz Server Radio
F
Antenna Adapter
G
High Gain Antenna
H
Server to DM-100
Interconnect Cable - 10'
I
DM-100 (Existing)
Indoor Server Radio Installation
1.
Mount the 900Mhz Server Radio (E) and wall pack transformer (B).
2.
Feed Interconnect cable (H) between Server Radio (E) and DM-100 (I).
Warning: Applying Power to the radio without an attached antenna may cause damage!
Exterior Server Radio Antenna Mounting
1.
Mount High Gain Antenna (G) using mounting hardware (A) on the
outside of the building housing the server radio. Mount the antenna
as high as possible in free air. Locate the antenna within 50 feet of
the server radio location. Refer to
There are two antenna mounting options:
• U bolts for pole mounting
• Brackets for wall mounting
B
A
C
D
E
F
G
H
I
Figure 1:
Server Kit Components
H
Figure 2:
New DM-100
Interconnect Cable
From
DM-100
To Wall
Pack
Figure 3:
Server Radio Connections
Figure 4:
Mounted Antenna
