User Manual DMRZ-LC(P)
AU: SJE BY: SJE V3 REV: 04/13/23 Page 1 of 2
User Manual
RazerCam
™
CVBS 170° NTSC (PAL) Camera
Camera Installation Instructions
1.
The opening size for camera mounting should be
1.38in (35.1mm). The perfect hole drill bit size is a
1 3/8 or 35mm. While not perfect, a 1 7/16 or
37mm will work.
2.
Make sure that your camera is mounted so that
the word “RazerCam”
is right side up.
3.
Tighten hex nut to hold the camera in place.
4.
Near the 5-pin connector on your camera is a
small loop of green wire. This wire is your
mirroring switch. When the circuit is complete
(intact) your camera image is mirroring. When
this circuit is incomplete (cut) your camera is
forward-facing. It is recommended to place shrink
wrap or electrical tape over the exposed wire
ends to prevent shorts. If utilizing a Dakota Micro
monitor your camera can also be mirrored from
the monitor. Your camera will need to be
rebooted (powered on/off) for this switch to take
effect.
5.
Your RazerCam
™
camera has an IR array that
outputs visible white light. If you mount this
camera close to another light source, your viewing in darkened environments will be increased.
Camera Warnings
NEVER RELY ON YOUR DAKOTA MICRO CAMERA AS A SAFETY FEATURE. It is up to your discretion to keep your road travel and other operations
safe. Your Dakota Micro camera will provide you with information only based on what it sees. Operation of machinery safety guidelines still
apply.
Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light
conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet.
DO NOT ATTEMPT TO DRIVE MACHINERY USING
THIS FEATURE.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
Camera Specifications
Description
This RazerCam
™
kit includes one (1) CVBS 170° camera
Part Numbers
DMRZ-LC (NTSC) or DMRZ-LCP (PAL)
Video System
NTSC or PAL
Video Type
CVBS
Image Pick-up Device
CMOS
Horizontal Resolution
480P
Minimum Illumination
0.01 [email protected]
Image Ratio
16:9
Auto Gain Control
Automatic based on lighting
Scanning System
Progressive
Camera Board Lens
170° Field of View
Operating Temp
-4°F (-20°C)
–
158°F (70°C)
Construction
Aluminum Case
Waterproofing Criteria
IP69K
Dimensions
1.76in(44.7mm) (W) x 1.09in(27.7mm) (D)
Camera Connector
5 pin Conxall/ Switchcraft
LED Lighting
Visible White Light
Warranty Period
1 Year
