・
Please read this instruction manual carefully before using the product.
・
Be sure to use the product as directed in these precautions. Misuse may cause electric shock, fire or failure.
・
Detach neither remodeling nor the cover of the product.
This product contains components with high voltage or high temperature.
・
To avoid electric shock or burns, do not touch these components.
・
Keep your face and hands away from the activated product.
Unexpected trouble may occur, causing injury.
・
This power supply unit is intended to be used with general or commonly used
electronic equipment.
・
Do not operate this product in over-charged current or short-circuit
conditions for more than 10 sec.
Such conditions may cause damage and electrical insulation failures.
・
Avoid actions causing shock such as dropping to this product.
1
．
Terminal description
・
Before connecting the input and the output , make sure that the input is shut off.
・
Please use less than 5A for each output terminal pin.
・
Connect the FG terminal with the earth terminal of the device or the equipment.
・
Please use applicable connectors for each pin.
Also please use suitable crump tool recommended by manufacturer
・
Wire for the output and the input separately. The noise-proof improves.
10
3
7
2
～
4
1
8
9
Prior to Use
Warning
Caution
Instruction Manual
MFS50 Series
BXH-001T-P0.6
or
SXH-001T-P0.6
XHP-2
(Manufacturer:
JST)
Connector
BVH-21T-P1.1
or
SVH-21T-P1.1
Terminal description
Input Terminal (L)
Input Terminal (N)
CN501
CN502
4
5
10
7
8
9
Output Terminal (-)
Output Terminal (-)
-R
Remote Control Terminal (+)
Remote Control Terminal (-)
+R
6
+
VHR-
4N(Manufacturer:
JST)
+
-
-
Output Voltage Adjustment Potentiometer
Output Terminal (+)
Output Terminal (+)
Frame Ground
CN101
Housing
Pin #
N
1
2
3
L
VHR-5N
(Manufacturer:
JST)