CC-Link to EtherCAT Gateway
사용자
매뉴얼
DAINCUBE Corp.
12 / 22
3.5.
Mounting guide
1) Selection of DIN Rail
DGW-CE can be mounted on the control panel using DIN Rail.
Follow the guide and mount it correctly on the DIN Rail.
Refer to the figure below for specifications of DIN Rail.
2) Mounting methode
First joint the top of DIN Rail mount and the join the bottom
After joining, confirm that it is firmly engaged.
For ventilation, wiring and product exchange, make sure that the space is at least 20mm in side and
30mm in top and bottom.
Turn the power off when assembling the unit or disconnecting wiring and removing the product
