Daimler Freightliner Cascadia 2021, Driver Manual

Page: 152 / 322

1. Select ····Menu.
2. Select Gas station.
2.1
When the route is active, the map appears
with gas stations along the route.
2.2
When the route is not active, gas stations
appear on the map near the current ve-
hicle location.
3. Select a gas station; the name of the gas station
appears on the map.
4. Select Drive.
5. The My Vehicle type and configuration screen
appears; verify the information by selecting the
arrow at the bottom right. If necessary, update
the information and then select the arrow at the
bottom right to verify it.
6.
Select Let’s Go··· to start the navigation guid-
ance.
Saving a Destination
My Places
In addition to saved destinations, My Places contains
the following information:
•
Home
•
Recent destinations
•
Work
•
Marked locations
Saving a Destination Under My Places
1. Select ····Menu.
2. Select My Places.
3. Select Add.
4. Select a destination on the map or select Search
and put in an address.
5. Select from the results list; the destination ap-
pears on the map.
6. Select Add to My Places to save the destination.
7.
Give the destination a unique name or keep it as
an address. Select the blue check mark to save
the destination.
8. The destination is saved under My Places and
marked with a star on the map.
Saving an Address as Home
Saving a second location and calling it Home
will replace the original Home location with the
second location address.
1.
Select ····Menu.
2. Select My Places.
3. Select Add Home if no home address has been
saved; if a home address has been saved, follow
the directions above for Saving a Destination
Under My Places to add a second home ad-
dress. In either case, the map with the search
bar appears.
4. Select home on the map or select Search and
enter an address.
5. Select Set if choosing a point on the map; select
from the results list if an address was entered
then select Set Home Location.
NOTE: Home is marked with a house symbol on
the list and on the map.
6. The home appears on the map and is saved as
Home.
Saving an Address as a Workplace
Saving a second location and calling it Work will
replace the original work location with the sec-
ond location address.
1. Select ····Menu.
2.
Select My Places.
3. Select Add Work. The map appears.
4. Select the workplace on the map or select
Search and enter an address.
f611774 08/01/2019
Fig. 7.7, Gas Stations Displayed - ICC5
Driver Assistance Features
7.9