Daimler Freightliner Cascadia 2021, Driver Manual, Page: 149 / 322

4. Select the desired units; the active setting is indi-
cated by a dot highlighted in color.
Reordering Menu Options
The top level menu options—My Places, My Routes,
Parking Lot, Gas Station, Report Safety Camera,
Start Recording, and Settings—can be reordered to
move the most used options to the first screen.
Reordering the Menu
1. Swipe right until you reach the end of the icon
list.
2. Select the pencil icon. Each menu item with its
corresponding icon will now outlined as if they
have been turned into illustrations on a playing
card.
3.
Select the menu item and icon you want to
move. It will be highlighted in color and two ar-
rows will appear at the bottom.
4. Press either the right or left arrow to move the
card over to the left or right until it’s in the de-
sired position.
5. If desired, select and move other cards.
6. Press the Done button when finished.
Navigation Menu
Destination Entry
NOTE: All the keyboard entries are locked when the
parking brake is disengaged.
Enter a destination into the navigation system using
the following options:
•
Enter a named location.
•
Enter a street address on the search line at the
top of the map.
•
Enter the longitude and latitude.
•
Enter map codes.
•
Zoom in on the map to find the desired loca-
tion and press and hold to select.
Results matching the characters entered using
the keyboard will appear on the address results
list and the Point of Interest (POI) categories or
POI results list.
Selecting a Destination From the
Address
NOTE: The farther away the destination is from
the current vehicle position, the longer it will
take for the route to be calculated.
1. Open the navigation system.
2. Tap next to the magnifying glass Search icon.
3. Enter the desired address, see Fig. 7.4 .
4. Select the desired location from the results lists.
5. Select Drive.
6. The My Vehicle type and configuration screen
appears; verify the information by selecting the
arrow at the bottom right. If necessary, update
the information and then select the arrow at the
bottom right to verify it.
7. Select Let’s Go··· to start navigation guidance.
Selecting a Destination From Points of
Interest (POI)
1. Select ····Menu.
2. Select Search option for input menu.
f611562 08/05/2019
1 2 3
4
5 6
7 8
1. Address Input Line
2. Address Results List
3. POI Results List
4. Scroll Bar
5. Selected Search Area
6. Switch to Map or Route View (Cancel Search)
7. Keyboard
8. Switch Between List (Lines) and Map (Circles) View
Fig. 7.4, Entering a Destination - ICC5
Driver Assistance Features
7.6