Daikin VRV HXY48TAVJU, Engineering Data

Page: 19 / 28

17
HXY48TAVJU EDUS392021-F18
C: 4P616151-1
15. Remote User Interface — EKRUAHTB
15.1 To Connect the User Interface
Before operating the user interface, follow this installation procedure.
NOTE
The wiring for connection is not included.
Procedure
Remove the front part of the user interface
Insert a slotted screwdriver into the slots (1) in the rear part of the user interface, and remove the front part of the user interface.
1
NOTE
The PCB is mounted in the faceplate of the user interface.
Be careful NOT to damage it.
Fixation of the user interface to the wall in case of installation as room thermostat
1. Cut off a 2 wire conductor.
2. Fix the wallplate of the user interface to the wall.
3. Connect the wires tot the user interface as shown below.
NOTE
Be careful NOT to distort the shape of the backside of the user
interface by overtightening the mounting screws..
From the bottom
a
b
P
1
P
2
c
a Rear part of the user interface
b Front part of the user interface
c
Use rippers to notch the part for the wiring to pass through
4. Reinstall the faceplate onto the wallplate. First begin fitting from the clips at the bottom.
1