Si-93
Introduction
v
1. Introduction
1.1
Safety Cautions
Cautions and
Warnings
■
Be sure to read the following safety cautions before conducting repair work.
■
The caution items are classified into “
Warning
” and “
Caution
”. The “
Warning
” items
are especially important since they can lead to death or serious injury if they are not followed closely.
The “
Caution
” items can also lead to serious accidents under some conditions if they are not
followed. Therefore, be sure to observe all the safety caution items described below.
■
About the pictograms
This symbol indicates an item for which caution must be exercised.
The pictogram shows the item to which attention must be paid.
This symbol indicates a prohibited action.
The prohibited item or action is shown inside or near the symbol.
This symbol indicates an action that must be taken, or an instruction.
The instruction is shown inside or near the symbol.
■
After the repair work is complete, be sure to conduct a test operation to ensure that the equipment
operates normally, and explain the cautions for operating the product to the customer
Summary of Contents for VAM 1000EJ
