Daikin VAM 1000EJ, Service Manual

Page: 42 / 81

Si-93 Troubleshooting
Troubleshooting 33
1.3 Overall Malfunction
Remote Controller
LCD Display
Error Code
666
6000 0
Inspection
5
Unit No.
5
LED Indication Remote Controller
5
Main Unit
5
Error Detection
Method Errors are detected based on open circuit in external input terminals (J1-JC).
Error Generating
Conditions
When external input terminal (J1-JC) is shorted during operation (“Overall Alarm” must be set in field
setting mode).
Possible Causes
■
Faulty external device
■
Broken wire
■
Faulty control PCB
Troubleshooting
Measure resistance
between external
input terminals
(J1-JC).
Is
resistance
200
Ω
or
lower?
YES
YES
Remove the cause of error in
connected external device.
Check wires for abnormalities
(broken wire, faulty contact,
etc.).
Replace control PCB.
Is
connected
external device
operating
properly?
NO
(HF002)
NO