Removal of Fan Guards / Electrical Box
Si041146
16
Removal Procedure
7. Removal of Fan Guards / Electrical Box
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the fan guards.
Use a sharp tool such as an
awl to unfasten the lower
hooks.
1
Unfasten the 2 hooks
and remove the fan
guard.
2. Remove the electrical
box.
Preparation
Remove the front grille
according to the “Removal of
Front Grille”.
1
Remove the screw and
remove the drip proof
plate.
2
Remove the screw and
release the earth wire.
Pull out the indoor heat
exchanger thermistor.
Fan guard
(R12110)
Drip proof plate
(R15283)
Earth wire
Indoor heat exchanger thermistor
(R12112)
