Daikin Siesta ATXM20N2V1B, User Reference Manual

Page: 28 / 56

5 | Operation
User reference guide
28
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
Note: Be sure to aim the user interface at the indoor unit and check for a receiving
tone when setting the Weekly timer operation.
INFORMATION
The clock MUST be set correctly before using any timer functions. Refer to "4.4.1 To
set the clock" [
4
15].
INFORMATION
▪
Weekly timer and ON/OFF timer operation CANNOT be used at the same time.
The ON/OFF timer operation takes priority. Weekly timer will be in standby,
disappears from the LCD. When the ON/OFF timer is completed, the
Weekly timer becomes active.
▪
The day of the week, ON/OFF timer mode, time and temperature (only for ON
timer) can be set with the Weekly timer. Other settings are based on previous ON
timer setting.
5.11.1 To set Weekly timer operation
1 Press .
Result: The day of the week and the reservation number of the current day
are displayed.
2 Press or to select the day of the week and the reservation number.
3 Press .
Result: The day of the week is set. and blink.
4 Press or to select the mode.
Result: The setting will change as follows:
Display Feature
ON timer
OFF timer
Blank Deletes reservation
5 Press .
Result: The ON/OFF timer mode is set. and the time blink.
Note: Press to return to the previous screen. If blank is selected, continue
to step 9.
6 Press or to select the time. The time can be set between 0:00~23:50 in
10-minute intervals.