Si281314E
Procedure to Remove PCB Assy (1)
Removal Procedure
5
4. Procedure to Remove PCB Assy (1)
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
Remove the top panel,
the front panel 2, the side
panel, and the piping
cover, following the
procedure indicated at
"Removing Outside
Panels and Related
Parts".
Remove the switch box,
following the procedure
indicated at "Removing
switch box".
1. Remove the PCB for the
display (A2P)
1
Remove the
connectors (X205A)
on the PCB for the
display.
Since the PCB for
the display (A2P) is
fixed with 2 hooks,
take from them and
then remove the
PCB for the display.
PCB for the display (Retrieved)
Installation section of the
PCB for the display (A2P)
PCB for the display
Outdoor unit
PCB
Hooks
Connector
(X205A)
Hook
PCB
Resin case