Service Diagnosis
SiBE05-722EE
62
Service Diagnosis
Method 2
1. Press the center of the
TEMP
button and the
MODE
button at the same time to enter the
diagnosis mode.
The left-side number blinks.
2. Press the
TEMP
or
TEMP
button and change the number until you hear the two
consecutive beeps or the long beep.
3. Diagnose by the sound.
beep: The left-side number does not correspond with the error code.
two consecutive beeps: The left-side number corresponds with the error code but the
right-side number does not.
long beep: Both the left-side and right-side numbers correspond with the error code.
The numbers indicated when you hear the long beep are the error code.
Error codes and description
→
Refer to page 64.
4. Press the
MODE
button.
The right-side number blinks.
(R4272)
(R14967)
(R4274)
(R4275)
(R14968)