manualshive.com logo in svg

Daikin RXS25K3V1B, Service Manual, Page: 51 / 144

Share
Download
Daikin RXS25K3V1B Service Manual Download Page 51

SiBE05-722EE

Control Specification

Functions and Control

41

3. Control Specification

3.1

Mode Hierarchy

Outline

The air conditioner control has normal operation mode, forced operation mode, and power 
transistor test mode for installation and servicing.

Detail

Cooling Only Model

Heat Pump Model

Note:

Unless specified otherwise, a dry operation command is regarded as cooling operation.

(R19505)

Stop

Discharging from capacitor

Preheating operation

Stop (indoor unit: OFF)

Cooling (includes drying)

Fan

Normal operation mode

Power transistor test mode

Forced cooling operation (for pump down operstion)

Forced operstion mode

Air conditioner control mode

Air conditioner control mode

Forced operation mode

Forced cooling operation (for pump down operation)

Power transistor test mode

Normal operation mode

Fan

Cooling (includes drying)

Heating

Heating

Defrosting

Stop (indoor unit: OFF)

Preheating operation

Discharging from capacitor

Stop

(R19522)

Summary of Contents for RXS25K3V1B

















































































































































Reviews:

No comments