SiAF341904E
Field Settings for Indoor Unit
Part 5 Field Settings and Test Operation
123
1.4.21 Setting of Swing Patterns when Cooling Thermostat is OFF
In cooling operation, when the airflow direction is set to swing, flaps swing even when the
thermostat is OFF. This setting allows to change the airflow direction when the thermostat is
OFF.
: Factory setting
1.4.22 Setting of Circulation Airflow
This is to set whether the circulation airflow function is enabled or disabled.
: Factory setting
1.4.23 Circulation Airflow Patterns
This setting is to change the appearance pattern of the circulation airflow direction depending
on the installation environment of the indoor unit.
Cooling
: Factory setting
1.4.24 Switching Panel Type
FXFSQ-AR
Change this setting depending on the type of the panel connected.
: Factory setting
Mode
No.
First
Code No.
Second
Code No.
Fixed
Swing
13 (23)
7
01
Set Position
Swing
02
Set Position
P0
03
P0
P0
04
Set Position
Swing
05
Set Position
P2
06
P2
P2
07
Set Position
Swing
Mode
No.
First
Code No.
Second
Code No.
Contents
13 (23)
13
01
Disabled
02
Enabled
Movement pattern
(a)
(b)
(c)
(d)
Appearance
Time (sec.)
13 (23)-14
01: Pattern 1
120
600
120
600
02: Pattern 2
120
600
0
0
03: Pattern 3
0
0
120
600
04: Pattern 4
120
600
120
600
Indicates the horizontal flap is in the position of reducing airflow volume (where the flap is
reversed).
Mode
No.
First
Code No.
Second
Code No.
Contents
13 (23)
15
01
Standard panel
02
Designer panel
