Procedure to Remove Thermistor
Si341211
14
Removal Procedure
4. Procedure to Remove Thermistor
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
For the details of the
removal of the
thermistor for outdoor
air temperature (R1T),
see the points to the
right.
Preliminary preparation
Remove the front panel (2)
and side panel according to
the "Procedure to Remove
Outside Panels".
2
Pull out the discharge
pipe thermistor after
inclining the mounting
spring outward.
[Procedure to remove thermistor
for outdoor air temperature]
3
Pull out the thermistor
for suction pipe 1 and
thermistor for suction
pipe 2, after inclining
the mounting spring
outward.
4
Pull out the subcooling
thermistor and
thermistor for liquid
pipe, after inclining the
mounting spring
outward.
5
6
Pull out the thermistor
for heat exchanger after
pulling the fixing metal
part.
Pull out the thermistor
for liquid pipe after
inclining the mounting
spring outward.
When passing the thermistor
for outdoor air temperature
gain through the outside
panel, do it through the hole
nearby attached with a
yellow color mark.
Thermistor for
suction pipe 1 (R3T)
Thermistor for heat
exchanger (R4T)
Thermistor for
subcooling (R6T)
Thermistor for liquid
pipe (R7T)
Hooks (2 places)
Side panel
Side panel
Notch
Fixing plate for thermistor (R1T)
Stopper
Marking (yellow color)
Insert
direction
Thermistor for outdoor
air temperature
Thermistor for suction pipe 2 (R5T)
Thermistor for discharge pipe (R2T)