Outdoor Fan / Fan Motor
Si001655E
4
Removal Procedure
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Disconnect the
connector [S70] and
remove the filament
tape.
[S70]: fan motor
2
Release the fan motor
lead wire from the
groove.
When reassembling, put the
fan motor lead wire through
the back of the fan motor so
as not to be entangled with
the outdoor fan.
3
4
Remove the nut of the
outdoor fan.
Remove the outdoor
fan.
Nut size: M6
Align the
mark of the
outdoor fan with the D-cut
section of the motor shaft
when reassembling.
Filament tape
[S70]
(R20382)
Groove
Fan motor lead wire
(R20383)
Lead wire
Outdoor fan
(R3249)
D-cut
Outdoor fan
Nut
(R20384)
10 mm
(0.39 inch)
(R18954)