Daikin RoCon+ HP Series, Operating Instructions Manual

Page: 9 / 516

3 Operation
Operating Instructions
9
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN
Fig. 3-3 Example: Elements in a two-page menu
1 Back icon
2 Menu bar
3 Menu icon
4 Page change arrow (for multi-page menus)
5 Help icon
Example : In the "Statistics" menu, change [→ Main menu]:
1 Turn the rotary button clockwise until the "Statistics" icon (on the
second menu page) turns blue.
2 Briefly press the rotary button to confirm ("OK").
è The "Statistics" submenu is called up
3.3.2 Help function
A help text is available for each menu icon.
Fig. 3-4 Help function
Example : Call up the help text for the "Hot water" menu and stop the
help function again [→ Main menu → User]:
1 Turn the rotary button clockwise until the help icon in the menu
bar turns blue.
2 Briefly press the rotary button to confirm ("OK").
è The help function becomes active, the "?" symbol is dis-
played on the last menu icon.
3 Turn the rotary button anticlockwise until the "?" symbol appears
on the "Hot water" icon.
4 Briefly press the rotary button to confirm ("OK").
è
The help text for the "Hot water" is displayed.
5 Briefly press the rotary button to confirm ("OK").
è Exits the help text level.
6 Turn the rotary button clockwise until the help icon in the menu
bar turns blue.
7 Briefly press the rotary button to confirm ("OK").
è The help function is terminated.
3.3.3 Navigating in lists and selecting list
entries
Lists exist as pure information lists or can be used to select a list
entry. Turning the rotary button switches between the list entries.
Multi-page lists are indicated by the page break arrow. Turn the
rotary button to switch between the list entries of the different pages.
In the case of selection lists, the currently selected list entry is indic-
ated by a tick. Click "OK" to select another list entry. The corres-
ponding setting is then accepted and the list is exited.
Fig. 3-5 List with selected list entry
Example : Switch the operating mode to "Summer" [→ Main menu
→ Operating mode]
1 Turn the rotary button clockwise until the "Summer" list entry is
displayed in blue.
2 Briefly press the rotary button to confirm ("OK").
è The box is ticked in the "Summer" list entry.
3 Turn the rotary button anticlockwise until the Back icon turns
blue.
4 Briefly press the rotary button to confirm ("OK").
è The setting is saved and the setting level is exited.
3.3.4 Setting setpoints
The setpoint of a parameter can be changed within the displayed
scale. Press "OK" to save the new value. Press and hold the rotary
button to exit the setting level without saving. For some parameters
there is an "Off" setting in addition to values on the scale. This set-
ting can be selected by turning the rotary button anticlockwise after
the minimum value of the scale has been reached.