Outdoor Fan / Fan Motor
Si011415E
4
Removal Procedure
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
2
3
Pull out the 2 terminals
(red, white) from the
capacitor (C1R).
Pull out the terminal 6
(black) from the
magnetic relay (K1M).
Cut the clamp and
release the fan motor
lead wire from the
groove.
4
Remove the nut and
remove the outdoor fan.
Nut size: M6
When reassembling, align
the
mark of the outdoor
fan with the D-cut section of
the motor shaft.
Capacitor
Magnetic relay
K1M
C1R
to fan motor:
white
to fan
motor: red
Groove
Fan motor
lead wire
Clamp
to fan motor:
black
(R21447)
Nut
Outdoor fan
D-cut
(R21448)
10 mm
(0.39 inch)
(R18954)