Outdoor Fan / Fan Motor
Si001420E
4
Removal Procedure
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Disconnect the
connector [S70].
[S70]: fan motor
2
Release the outdoor
temperature thermistor
from the protection net
and pull out from the
top U-bend pipe of
outdoor heat
exchanger.
When reassembling, make
sure to pass the outdoor
temperature thermistor
through the top U-bend pipe
and the slit, then fix it at the
holder.
3
Release the fan motor
lead wire from the
groove and the hook.
[S70]
(R21220)
Outdoor temperature thermistor
Protection net
(R21221)
Slit
Top U-bend pipe
(R21222)
Hook
Fan motor
lead wire
Groove
(R21223)
