Daikin REYQ96MTJU, Design, Installation & Testing Instruction, Page: 211 / 236

Si39-406 Operation Procedure
Operation Manual 205
5.3 Adjusting the Air Flow Direction
Press the air flow direction button to select the air direction.
The air flow flap display swings as shown below and the air flow direction
continuously varies. (Automatic swing setting)
Press the air flow direction adjust button to select the air direction of your choice.
The air flow flap display stops swinging and the air flow direction is fixed. (Fixed air
flow direction setting)
Movement of the air flow flap
For the following conditions, a micro computer controls the air flow direction which may be different
from the display.
The air flow direction can be adjusted in one of the following ways.
„
The air flow flap itself adjusts its position.
„
The air flow direction can be fixed by the user.
„
Automatic “ ” and desired position “ ”.
Note:
„
The movable limit of the flap is changeable. Contact your Daikin dealer for details.
„
Avoid operating in the horizontal direction “ ”. It may cause dew or dust to settle on the
ceiling.
COOLING HEATING
„
When starting operation.
„
When the room temperature is higher than
the set temperature.
„
At defrost operation.
„
When operating continuously at horizontal air flow direction.
„
When continuous operation with downward air flow is performed at the time of cooling with a
ceiling-suspended or a wall-mounted unit, the microcomputer may control the flow direction, and
then the remote controller indication also will change.
F
1
2
Wall Mounted
Multi-flow
Ceiling Suspended