Daikin REYQ-AATJA, Service Manual

Page: 199 / 495

SiUS372201EA Field Settings for Indoor Unit
Part 5 Field Settings and Test Operation 192
Note(s)
1. Settings are made simultaneously for the entire group, however, if you select the mode No.
inside parentheses, you can also set by each individual unit. Setting changes however cannot
be checked except in the individual mode for those in parentheses.
2. The mode numbers inside parentheses cannot be used by wireless remote controllers, so they
cannot be set individually. Setting changes also cannot be checked.
3. Do not make settings other than those described above. Nothing is displayed for functions the
indoor unit is not equipped with.
4. 88 or Checking the connection. Please stand by. may be displayed to indicate the remote
controller is resetting when returning to the normal mode.
13 (23)
0 Setting of airflow rate Standard

High ceiling 1 High ceiling 2 — 207
1
Airflow direction setting 4-direction
airflow

3-direction airflow
2-direction
airflow
— 208
2
Swing pattern settings All direction
synchronized
swing
—
Facing
swing

— 208
4
Setting of airflow direction
adjustment range
Draft prevention Standard

Ceiling soiling
prevention
— 208
5
Setting of static pressure
selection
Standard

High static
pressure
— — 209
6
External static pressure
settings
Refer to page on the right for details. 209
14 (24)
4
Optional kit setting (UV lamp
+ humi economizer)
Refer to page on the right for details. 210
5
Dry mode set temperature
Room
temperature

Same as cooling
mode set
temperature
— — 210
9
Mold proof operation setting
— Standard

For high
humidity areas
— 211
11 Gas furnace test mode OFF

Low heat High heat — 211
15 (25)
0 Drain pump operation setting — ON

OFF — 211
1
Humidification when heating
thermostat is OFF
Not equipped

Equipped — — 211
2
Setting of direct duct
connection
Not equipped

Equipped — — 211
3
Interlocked operation
between humidifier and drain
pump
Not
interlocked

Interlocked — — 212
5
Individual setting of
ventilation
Normal

Individual — — 212
1b 4
Display of error codes on the
remote controller
— Two-digit display —
Four-digit
display

212
1c
0
Room temperature display Room
temperature is not
displayed
Room
temperature is
displayed

— — 212
1
Thermistor sensor for auto
changeover and setback
control by the remote
controller
Utilize the return
air thermistor
Utilize the
remote
controller
thermistor

— — 212
3
Access permission level
setting
Level 2

Level 3 — — 213
1e
2 Setback availability N/A

Heat only Cool only Cool/heat 213
14
Setting "restricted / permitted"
of airflow block
Refer to page on the right for details. 213
Mode
No.
(Note 2)
First
Code
No.
Setting Contents
Second Code No.
Reference
Page
01 02 03 04