Removal of Electrical Components
Si01-983
10
Removal Procedure
2. Removal of Electrical Components
Procedure
Warning
Be sure to for wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
Remove the nut and
remove the terminal
cover.
Preparation
Remove the outer panels
and disconnect the
connector for the fan motor
according to the “Removal of
Outer Panels / Fan Motor”.
2
Disconnect the
compressor lead wires.
S(W) : Yellow
C(U) : Blue
R(V) : Red
3
Lift and remove the
electrical components
ASSY.
(R12790)
Terminal cover
(R12791)
Compressor lead wire
(R6761)
S(W)
R(V)
C(U)
(R12792)
Electrical Components ASSY