u
nIT
o
PTIons
www.DaikinApplied.com 75
IM 893-10 • ROOFPAK SINGLEZONE UNITS
Modulating Hot Gas Reheat
In the dehumidification mode, mechanical cooling is used to
cool air low enough to lower the moisture content of the air and
then reheated to comfort conditions.
Figure 74: Dual 2-Way Valve Refrigeration Schematic
Figure 75: Ideal for Neutral Air Ventilation Control
†
†
For variable speed compressor units only. Each refrigerant circuit contains a solenoid valve to block refrigerant flow to the upper half of the condenser
coil, for low load /low ambient conditions .