Troubleshooting by Remote Controller
Si20-701_B
81
3.5
A1
Indoor Unit PCB
Abnormality
Remote Controller Display
A1
Applicable Models
All indoor models
Method of Error Detection
Check data from E²PROM.
Error Decision Conditions
The error is generated when the data from the E²PROM
is not received correctly.
E²PROM (Electrically Erasable Programmable Read
Only Memory): A memory chip that holds its content
without power. It can be erased, either within the
computer or externally and usually requires more voltage
for erasure than the 5 volts used in logic
circuits. It functions like non-volatile RAM, but writing to
E²PROM is slower than writing to RAM.
Supposed Causes
Defective indoor unit PCB
External factor (Noise, etc.)