Daikin Quaternity H-Series, Engineeiring Data

Page: 11 / 80

Capacity Tables EDUS04-906_b
10 Room Air Conditioners H-Series
3D063098A
Symbols Note:
AFR : Airflow rate (m
3
/min.) 1. Ratings shown are net capacities which include a deduction for indoor fan
motor heat.
2. shows nominal (rated) capacities and power input.
3. TC, PI and SHC must be calculated by interpolation using the figures in
the above tables. (Figures outof the tables should not be used for
calculation.)
4. About SHC which are not mentioned on the table, please calculate them
with around values in direct proportion.
5. Capacities are based on the following conditions.
Corresponding refrigerant piping length : 25ft (7.5 m)
Level difference : 0ft
6. Airflow rate (AFR) and Bypass factor (BF) are tabulated above table.
7. Cooling capacity at -10 degrees Celsius / 14 degrees Fahrenheit.
BF : Bypass factor
EWB : Entering wet bulb temp. (°C) / (°F)
EDB : Entering dry bulb temp. (°C) / (°F)
TC : Total capacity (kW) / (kBtu/h)
SHC : Sensible heating capacity (kW) / (kBtu/h)
PI : Power input (kW)
Temp: Celsius / TC, SHC, PI: kW
INDOOR OUTDOOR
EWB EDB -10 (°CDB)
°C °C TC SHC PI
14.0 20 3.44 2.77 0.31
Temp: Fahrenheit / TC, SHC: kBtu / PI: kW
INDOOR OUTDOOR
EWB EDB 14 (°FDB)
°F °F TC SHC PI
57.2 68.0 11.75 9.44 0.31