Operating Manual
SiE74-202
14
Operation Manual
1.13 How to Clean the lonizer
If
(see page 4) on the front panel begins to flash, clean the ionizer.
1. Stop the unit and remove the power cable from its socket.
2. Remove the front panel.
See step 2 on page 13.
3. Remove the ion filter (roll) case.
Hold the ion filter (roll) case by the left and right side handles, and
lift upwards and out.
4. Remove the prefilter.
See step 3 on page 13.
5. Remove the ionizer.
Press the tabs as shown below until lifting the ionizer slightly, then
pull towards you and out.
1
2
4
PHOTO
CTAIY
TIC
AIR C
LEANE
R
MC40
1VE
1
2
4
PHOTO
CTAIY
TIC
AIR C
LEANE
R
MC40
1VE
Handles
Ion filter (roll) case
2
1
Pull ionizer in this direction.
Ion filter (roll) case
Press this way.
Press this way.
Press this way.
Press this way.
Tabs
Summary of Contents for MC401VE
