Daikin Madoka Installation And Operation Manual Download Page 8

5 Maintenance and service

Installation and operation manual

8

BS

Madoka wired remote controller

4P596265-1 – 2019.11

4.7

Advanced usage

The  controller  only  allows  for  basic  operation.  For  advanced
operation, use the Madoka Assistant app.

INFORMATION

For more information, see the installer and user reference
guide.

5

Maintenance and service

5.1

Overview: Maintenance and
service

When a system components needs maintenance or service, consult
your  dealer.  To  indicate  that  maintenance  is  due,  the  controller

displays 

  on  the  home  screen,  and/or  displays  a  warning  screen

as  soon  as  you  press 

  to  enter  the  main  menu  from  the  home

screen.

The  following  warning  screens  are  related  to  indoor  unit
maintenance:

Clean the indoor unit filter

Replace the indoor unit filter

Empty the indoor unit dustbox

6

Troubleshooting

6.1

Overview: Troubleshooting

When the system is in error, consult your dealer. To indicate system

error, the controller displays 

 on the home screen, and/or displays

an  error  screen  as  soon  as  you  press 

  to  enter  the  main  menu

from the home screen.

Error screen (example)

INFORMATION

If the controller is set to be operable in "Supervisor" mode,
then  the  controller  adds  the  "supervised  room  address"  of
the  faulty  indoor  unit  to  the  error  screen.  In  “Supervisor”
mode,  it  is  mandatory  to  set  a  unique  “supervised  room
address”  for  every  indoor  unit.  The  “supervised  room
address” can be set in the Madoka Assistant app.

CH-02

1234

For  more  information  about  the  modes  the  controller  can
be set to be operable in, see 

"3.1 About the controller" 

[

4

 4].

6.2

Refrigerant leak detection

When the system detects a refrigerant leak, an alarm goes off. Stop
the alarm and consult your dealer.

INFORMATION

▪ It  is  possible  to  stop  the  leak  detection  alarm  from  the

controller and from the app. For more information about
the app, see the installer and user reference guide.

▪ Depending  on  the  mode  the  controller  is  set  to  be

operable  in,  the  refrigerant  leak  detection  screen  can
have  more  or  less  information.  For  more  information,
see the installer and user reference guide.

6.2.1

To stop the leak detection alarm

Unit  00

1

Press 

 for 3 seconds to stop the alarm.

Result: 

The alarm stops.

Unit  00

2

Consult your dealer.

For the installer

7

About the box

7.1

To unpack the controller

1

Open the box.

2

Separate the accessories.

Summary of Contents for Madoka













Reviews: