manualshive.com logo in svg

Daikin Madoka BRC1H82K, Installer And User Manual

Share
Download
Daikin Madoka BRC1H82K Installer And User Manual Download Page 47

12

 | 

Remote controller: Overview

Installer and user reference guide

47

BK+S
Madoka wired remote controller
4P596268-1A – 2022.02

12.3 Status icons

Icon

Description

System operation ON. 

Indicates that the system is in operation.

System operation OFF. 

Indicates that the system is NOT in

operation.

Bluetooth

.

(1)

 Indicates that the controller is communicating with

a mobile device, for use with the Madoka Assistant app.

Lock. 

Indicates that a function or operation mode is locked and

therefore cannot be used or selected.

Centralised control.

 Indicates that the system is controlled by

central control equipment (optional accessory) and that control
of the system by the controller is limited.

Changeover under centralised control.

 Indicates that the

cooling/heating changeover is under centralised control by
another indoor unit, or by an optional cool/ heat selector that is
connected to the outdoor unit.

Defrost/Hot start.

 Indicates that the defrost/hot start mode is

active.

Schedule/Timer.

 Indicates that the system operates according to

a schedule, or that the OFF timer is enabled.

Time not set

. Indicates that controller's time is not set.

Self-cleaning filter operation.

 Indicates that self-cleaning filter

operation is active.

Quick Start.

 Indicates that Quick Start mode is active (Sky Air

only).

Test operation.

 Indicates that Test Operation mode is active (Sky

Air only).

Inspection

. Indicates that the indoor or outdoor unit is being

inspected.

Periodic inspection.

 Indicates that the indoor or outdoor unit is

being inspected.

Backup.

 Indicates that in the system an indoor unit is set as

backup indoor unit.

Individual airflow direction

. Indicates that the individual airflow

direction setting is enabled.

Information.

 Indicates that the system has a message to convey.

To see the message, go to the information screen.

Warning. 

Indicates that an error occurred, or that an indoor unit

component needs to be maintained.

(1)

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and use of such marks
by Daikin Europe N.V. is under license. Other trademarks and trade names are those of their respective owners.

Summary of Contents for Madoka BRC1H82K









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands