11
|
Starting up the system
Installer and user reference guide
44
BK+S
Madoka wired remote controller
4P596268-1A – 2022.02
INFORMATION
If the slave controller does not display the home screen two minutes after its
designation, turn off the power and check the wiring.
INFORMATION
After re-designating a controller, the system requires a power reset.
INFORMATION
Slave controllers do not support all functions. If you cannot find a function on a slave
controller, check for it on the master controller.
INFORMATION
For master and slave controllers to function together, they need to have the same
value for the "Home screen setpoint" setting (Madoka Assistant app setting), i.e. all
set to "Numerical" or all set to "Symbolic".
11.1.1 To designate a controller as slave
Prerequisite:
A master controller is already connected to the indoor unit.
1
Connect a second controller.
Result:
It will start up automatically.
2
Wait for a U5 or U8 error to appear on the screen.
3
When the U5 or U8 error appears, press
and keep it pressed until "2"
appears on the screen.
Result:
The controller is now designated as slave.
Summary of Contents for Madoka BRC1H82K
Page 1: ...Installer and user reference guide Madoka wired remote controller BRC1H82W BRC1H82K BRC1H82S ...
Page 134: ......
Page 135: ......
