manualshive.com logo in svg

Daikin Madoka BRC1H82K, Installer And User Manual

Share
Download
Daikin Madoka BRC1H82K Installer And User Manual Download Page 39

10

 | 

Installation

Installer and user reference guide

39

BK+S
Madoka wired remote controller
4P596268-1A – 2022.02

a

Wiring from the top

b

Wiring from the left

c

Wiring from the bottom

In  case  you  are  routing  the  wiring  from  the  rear,  you  do  not  have  to  remove
anything.

INFORMATION

When routing the wiring from the top or from the rear, insert the wiring through the
knockout hole before mounting the rear casing to the wall.

10.2.2 To mount the controller

1

Take the screws and plugs from the accessory bag.

2

Mount the rear casing to a flat surface.

INFORMATION

If  required  (e.g.  when  mounting  to  a  flush-mounted  electrical  installation  box),
mount the rear casing by way of the knockout holes.

NOTICE

When mounting the rear casing to a flush-mounted electrical installation box inside a
wall, make sure that that wall is completely flat.

NOTICE

Be careful not to distort the rear casing by overtightening the mounting screws.

Summary of Contents for Madoka BRC1H82K









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands