Daikin Madoka BRC1H82K Installer And User Manual Download

Page: 100 / 136

About the app

Installer and user reference guide

100

BK+S

Madoka wired remote controller

4P596268-1A – 2022.02

Make installer mode settings.

Installer mode settings

Description

Installer mode

Enable or disable installer mode.

Temporary / Indefinite

Set the duration of installer mode.

▪

Temporary: installer mode active for
30 minutes. After 30 minutes, installer
mode will automatically deactivate.
(default)

▪

Indefinite: installer mode active until
the next manual deactivation.

Installer mode indicator

Set whether installer mode activation is
indicated by the installer mode
indicator.

INFORMATION

Mind that installer mode is automatically enabled as soon as you enter the installer
mode menu.

15.4 Demo mode

15.4.1 About demo mode

To try out the app's operation and configuration functions in a safe environment, it
is possible to launch a demo version of the app.

15.4.2 To launch demo mode

Prerequisite:

You are not in demo mode.

Go to the main menu.

Tap "Demo mode".

Result:

You are in demo mode.

15.4.3 To exit demo mode

Prerequisite:

You are in demo mode.

Go to the main menu.

Tap "Exit demo mode".

Result:

You exited demo mode.

15.5 Functions

15.5.1 Overview: Functions

NOTICE

Depending on the user access level, more or less settings may be visible in the unit
settings menu. See

"15.3 User access levels"

[

98] for more information about

changing modes.

Summary of Contents for Madoka BRC1H82K








































































































































Search results

Summary of Contents for Madoka BRC1H82K

Reviews:

Related manuals for Madoka BRC1H82K

Brands by name

Popular brands

Daikin Madoka BRC1H82K, Installer And User Manual

Search results

Summary of Contents for Madoka BRC1H82K

Reviews:

Related manuals for Madoka BRC1H82K

Brands by name

Popular brands