8.
Check the connectivity status; if connection is established, the 'OK' will be displayed with a green background (see
Figure 7).
Setpoint range of Easy Wall Controller
The Online Controller enables you to set the temperature range for the adjustable dial of the EWC. On Figure 8, there is
the SETUP menu of the Online Controller – Wall Controller settings page. Here you can set the required MIN and MAX
values for each operating mode.
Example:
Heating – max = 30
Heating – min = 10
Average value = 0,5 * (30+10) = 20
Calculation of displayed temperature value
SETUP menu - the Temperature screen enables you to set and define a value
which will be displayed in the main control module (Figure 9). In case of using and
selecting more sensors, the displayed value will be their arithmetic average.
The selection is done by checking the appropriate selection boxes (Figure. 10).
Note: Temperature sensor 1 (2) can be selected either for calculating room (indoor) temperature or ambient (outdoor)
temperature.
CONTINEO, s.r.o. and COLTBURG, s.r.o. declare that the product KBRCS01A is in identity
with requirement and other clauses of directive 1999/5/EC.
Directive 2002/96/EC WEEE is a EU legislative standard, which the main purpose is, as a first priority, the
prevention of waste electrical and electronic equipment (WEEE), and in addition, the reuse, recycling and
other forms of recovery of such wastes so as to reduce the disposal of waste. Do not put this product into
common household waste. Return it to an appropriate centre for electric and electronic waste.
Figure 8
Figure 10
Figure 9
