Daikin homecontrols EKRRVATU1BA, Installation And Operation Manual

Page: 28 / 36

28
Restore factory settings Maintenance and cleaning
10 Maintenance and cleaning
The accessory does not require you to carry out
any maintenance other than replacing the battery
when necessary. Enlist the help of an expert to
carry out any repairs.
Clean the accessory using a soft, lint-free cloth that is
clean and dry. You may dampen the cloth a little with luke-
warm water in order to remove more stubborn marks. Do
not use any detergents containing solvents, as they could
corrode the plastic housing and label.
9 Restore factory settings
The factory settings of the accessory can be re-
stored. If you do this, you will lose all your settings.
To restore the factory settings of the accessory, proceed
as follows:
1. Open the battery compartment (B) by pulling the
cover backwards and then down (
see figure 7
).
2. Remove the batteries.
3. Insert the batteries again (
see figure 8
) and long
press the system button (C) at the same time ( see
figure 3
).
» The LED quickly starts flashing orange.
4. Release the system button.
5. Long press the system button again.
» The LED lights up green.
6. Release the system button to finish the procedure.
» The accessory will perform a restart.