Daikin homecontrols EKRCTRDI2BA, Installer And User Manual

Page: 18 / 40

18
Start-up Start-up
5 Start-up
5.1 Connecting DHC accessories
Read this entire section before starting to
connect other accessories.
To integrate the DHC Room Thermostat into your ecosys-
tem and enable it to communicatie with other accessories,
you must connect them first.
You can connect the DHC Room Thermostat to the DHC
Access Point via the ONECTA app. It is also possible to
create a direct connection to other DHC accessories. For
further information on direct connection, see the DHC
Application Guide.
5.1.1 Connecting to the DHC Access Point
First set up your DHC Access Point via the
ONECTA app to enable operation of other DHC ac-
cessories within your system. For further informa-
tion, see the manual of the DHC Access Point.
After connecting the DHC Room Thermostat to the
DHC Access Point, the menu of the DHC Room
Thermostat will be hidden and settings can be ad-
justed only via the ONECTA app.
To connect the DHC Room Thermostat to the DHC Access
Point, proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol (+).
3. Select the menu item Add Daikin Home Controls .
4. Select Add DHC Accessory (see figure 4) .
5. Open the battery compartment (G) using a slotted
screwdriver to loosen the wall mounting plate (see
figure 3)
.
6. Remove the insulation strip from the battery com-
partment.
» Connection mode remains activated for 3 minutes.
You can manually start the connection mode for
another 3 minutes by pressing the system button
(C) shortly ( see figure 4 ).
7. Follow the instructions in the app.