Daikin FXYBP20K7V1, Service Manual

Page: 116 / 193

SiE 00-07 Test Operation
Test Operation R-407C PLUS Series 105
1.13 Centralized Control Group No. Setting
BRC1A51·52
If carrying out centralized control by central remote controller or unified ON/OFF controller, group No.
must be set for each group individually by remote controller.
Group No. setting by remote controller for centralized control
1. When in the normal mode, push the button for 4 seconds or more, and operation then enters
the “field setting mode.”
2. Set mode No. “00” with the button.
∗
3. Push the button to inspect the group No. display.
4. Set the group No. for each group with the button (The group No. increases in the manner of 1-00,
1-01, ...,1-15, 2-00,...4-15. However, the unified ON/OFF controller displays only the group No. within
the range selected by the switch for setting each address.)
5. Push the timer button to define the selected group No.
6. Push the button to return to the normal mode.
Even if not using a remote controller, connect the remote controller when setting the group No., set the
group No. for centralized control, and disconnect after making the setting.
Set the group No. after turning on the power supply for the central remote controller, unified ON/OFF
controller, and indoor unit.
BRC7A Type Group No. setting by wireless remote controller for centralized control
1. When in the normal mode, push button for 4 seconds or more, and operation then enters the
“field set mode.”
2. Set mode No. “00” with button.
3. Set the group No. for each group with button (advance/backward).
4. Enter the selected group numbers by pushing button.
5. Push button and return to the normal mode.
BRC7A Type