Si241306
Procedure to Remove Swing Motor
Removal Procedure
7
4. Procedure to Remove Swing Motor
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
Disconnect harness for
swing motor and 1 for
limit switch at connector
section.
2
Remove 4 screws to
dismount discharge
assembly.
3
Remove 2 screws to
dismount swing motor
assembly.
Caution
2 of 8 horizontal blades
located at top and bottom
position can be moved by
hand individually, while rest 6
blades are linked to move by
hand at the same time.
4
Disengage hooks on
swing motor mounting
plate cover and remove
2 screws. Then, remove
swing motor.
Harness for swing motor
Harness for limit motor
Discharge
assembly
Harness for swing motor
Filament tape
Swing motor
mounting cover
Screws
Filament tape
Swing motor