5
|
Operation
User reference guide
19
FTXF50~7 FTXF50~71A2V1B
Daikin room air conditioner
4P513685-9E – 2021.07
5.3.1 To start/stop operation mode and to set the temperature
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
1
Press
one or more times to select the operation mode.
Result:
The mode will be set in the following sequence:
2
Press
to
start
operation.
Result:
is displayed on the LCD.
Result:
The operation lamp lights up.
3
Press or on the
button one or more times to lower or raise the
temperature
.
Note:
When using drying or fan only mode, you cannot adjust the temperature.
4
Press
to
stop
operation.
Result:
disappears from the LCD.
Result:
The operation lamp goes off.
5.4 Airflow rate
INFORMATION
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
▪
The airflow rate in heating mode will lower to avoid generating cold airflow.
When temperature of the airflow rise, operation will continue at the set airflow
rate.
1
Press
to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
