4 Operation
Operation manual
5
FTXF20~71A2V1B
Daikin room air conditioner
3P511999-3 – 2017.11
Feature
Tasks
Advanced features
Econo
To use the system when you are also
using other power-consuming
appliances.
To save energy.
Comfort
To provide a comfortable airflow that
does NOT come in direct contact with
people.
Powerful
To cool down or heat up the room
quickly.
ON timer +
OFF
timer
To automatically turn ON or OFF the
system.
4.3
Operation mode and temperature
setpoint
When.
Adjust the system operation mode, and set the temperature
when you want to:
▪ Heat up or cool down a room
▪ Blow air in a room without heating or cooling
▪ Decrease the humidity in a room
What.
The system operates differently depending on the user
selection.
Setting
Description
Automatic
The system cools down or heats up a
room to the temperature setpoint. It
automatically switches between cooling
and heating if necessary.
Drying
The system decreases the humidity in a
room without changing the temperature.
Heating
The system heats up a room to the
temperature setpoint.
Cooling
The system cools down a room to the
temperature setpoint.
Fan
The system only controls the airflow
(airflow rate and airflow direction).
The system does NOT control the
temperature.
Additional info:
▪
Outside temperature.
The system's cooling or heating effect
decreases when the outside temperature is too high or too low.
▪
Defrost operation.
During heating operation, frost might occur on
the outdoor unit and decrease the heating capacity. In that case,
the system automatically switches to defrosting operation to
remove the frost. During defrosting operation, hot air is NOT
blown from the indoor unit.
4.3.1
To start/stop operation and to set the
temperature
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
1
Press
one or more times to select the operation mode.
Result:
The mode will be set in the following sequence:
2
Press
to
start
operation.
Result:
is displayed on the LCD.
Result:
The operation lamp lights up.
3
Press or on the
button one or more times to lower or
raise the
temperature
.
Note:
When using drying or fan only mode, you cannot adjust the
temperature.
4
Press
to
stop
operation.
Result:
disappears from the LCD.
Result:
The operation lamp goes off.
4.3.2
Airflow rate
1
Press
to choose:
5 airflow rate levels, from "
" to "
"
Automatic operation
Indoor unit quiet operation. When the airflow is set to
"
", the noise from the unit will be reduced.
Note:
When using
Drying
operation or
Fan only
mode, you
CANNOT adjust the airflow rate setting.
To adjust the airflow rate
1
Press
to change the airflow setting in the following
sequence.
