Troubleshooting by Remote Controller Display / LED Display
SiBE28-804
224
Troubleshooting
5.44 “
UC
” Centralized Address Setting Error
Remote
Controller
Display
UC
Applicable
Models
All models of indoor units
Method of
Malfunction
Detection
Indoor unit microcomputer detects and judges the centralized address signal according to the
transmission between indoor units.
Malfunction
Decision
Conditions
When the microcomputer judges that the centralized address signal is duplicated
Supposed
Causes
Faulty centralized address setting
Faulty indoor unit PC board
Troubleshooting
Are
devices relating to
centralized control connected
to the indoor
unit?
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.
YES
NO
Change the setting so that the centralized
address is not duplicated.
Replace the indoor unit PC board.
Summary of Contents for FHQ100BUV1B x 2
