Si281313E
Procedure to Remove Thermistors
Removal Procedure
9
7. Procedure to Remove Thermistors
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Removal of suction air
thermistor
Dismount the backside
plate according to the
removal procedure for the
drain pan.
1
Remove the single
setscrew of the suction
air thermistor (R1T).
2. Removal of heat
exchanger thermistor
Dismount the service lid
according to the removal
procedure for the drain
pan.
1
Remove the single
setscrew to dismount
service lid (2).
2
Press the support
spring to pull out the
heat exchanger
thermistor (R2T).
3. Removal of air outlet
thermistor
Dismount the backside
plate and bottom plate
according to the removal
procedure for the drain
pan.
1
Remove the single
screw of the suction air
thermistor (R3T).
Fixing screw
Suction air thermistor (R1T)
Service lid (2)
Heat exchanger thermistor (R2T)
Screw
Screw
Air outlet thermistor (R3T)