16
|
Unit installation
Installer and user reference guide
52
FAA71+100BUV1B
Split system air conditioner
4P654517-1 – 2021.03
a
Obstruction
b
Minimum distance to the floor
NOTICE
NEVER mount the indoor unit directly on the wall. Use the attached mounting plate
for installation.
16.2 Opening and closing the unit
16.2.1 To remove the front panel
1
Open the front panel. Hold the front panel by the panel tabs on both sides and
open until the panel stops.
a
a
Panel tabs
2
Remove the front panel by pushing hooks on either side of the front panel
towards the side of the unit and remove the panel. Or remove it by sliding the
front panel either to the left or right and pulling it forward.
a
a
a
a
Panel hook
16.2.2 To re-install the front panel
1
To attach the front panel, align the hooks of the front panel with the slots and
push them all the way in.
2
Close the front panel slowly.
16.2.3 To remove the front grille
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,…)
when installing, maintaining or servicing the system.
