5 Before operation
Operation manual
18
EZESHP20 EZLSHP20AUAW1B
Exigo E1500 Trailer Refrigeration Unit
4P726855-1 – 2023.03
a
b
The Active alarms screen shows:
▪ The alarm code (a).
▪ A description of the problem (b).
5
Before operation
WARNING
Ask your dealer for improvement, repair, and maintenance.
Incomplete improvement, repair, and maintenance may
result in water leakage, electrical shock and fire.
WARNING
This unit contains electrical and hot parts.
WARNING
Before operating the unit, be sure the installation has been
carried out correctly by an installer.
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. Do NOT remove the fan guard. When the
fan is rotating at high speed, it will cause injury.
WARNING
Do NOT keep flammable materials inside the unit. They
may cause an explosion or a fire.
WARNING
Improper installation or attachment of equipment or
accessories could result in electrical shock, short-circuit,
leaks, fire or other damage to the equipment. ONLY use
accessories, optional equipment and spare parts made or
approved by Daikin.
WARNING
Check the isometer for fault currents on the unit.
NOTICE
NEVER inspect or service the unit by yourself. Ask a
qualified service person to perform this work.
INFORMATION
The electric fuel pump carries the fuel from the tank to the
unit. In exceptional circumstances (e.g. if the fuel tank
suction pipe is empty after running out of fuel), the hand
pump (a) on the fuel pre-filter can be used to get the fuel
(faster) to the fuel pump and the unit.
a
6
Operation
6.1
Operation range
Use the system in the following temperature and humidity ranges for
safe and effective operation.
Temperature range: –25°C to +50°C
Within the working range the cold room temperature can be set from
–28°C to +25°C.
The fuel consumption depends on the outside temperature and the
cold room temperature setting.
NOTICE
The operator should be aware of the available fuel supply
so that the autonomous operation of the unit is never
compromised.
6.2
Operation procedure
▪ Read the documentation carefully before operating the unit to
ensure the best possible performance.
▪ If you select a function which is not available, the message
appears on the user interface.
▪ Turn ON the unit before loading the refrigerated goods. Varies
from 15 to 30 minutes, depending on the ambient temperature.
▪ Eliminate the humidity inside the cold room by switching to defrost
9]).
▪ Choose the correct temperature setting for the product that is to
be transported (see
▪ Check the temperature of the product. Make sure it is at the
correct storage temperature before loading.
▪ If there was a power failure during operation, the system
automatically starts-up in road mode.
