7 Configuration
Installation manual
30
ETBH/9W
Daikin Altherma 3 H MT W
4P634879-1 – 2021.03
7.5
Menu structure: Overview installer settings
[9]
Installer settings
Configuration wizard
Domestic hot water
Backup heater
Booster heater
Emergency
Balancing
Water pipe freeze prevention
Benefit kWh power supply
Power consumption control
Energy metering
Sensors
Bivalent
Alarm output
Auto restart
Power saving function
Disable protections
Overview field settings
Forced defrost
[9.2]
Domestic hot water
Domestic hot water
DHW pump
DHW pump schedule
Solar
[9.3]
Backup heater
Backup heater type
Voltage
Configuration
Additional capacity step 2
Capacity step 1
Equilibrium
Equilibrium temperature
Operation
[9.4]
Booster heater
Capacity
BSH allowance schedule
BSH eco timer
Operation
Bizone kit
Export MMI settings
[9.6]
Balancing
Space heating priority
Priority temperature
Offset BSH setpoint
Minimum running timer
Anti-recycle timer
Maximum running timer
Additional timer
[9.A]
Energy metering
Electricity meter 2
Electricity meter 1
[9.B]
Sensors
External sensor
Ext. amb. sensor offset
Averaging time
[9.C]
Bivalent
Bivalent
Boiler efficiency
Temperature
Hysteresis
[9.8]
Benefit kWh power supply
Benefit kWh power supply
Smart grid operation mode
Allow electrical heaters
Limit setting kW
Enable room buffering
Allow heater
Allow pump
[9.P]
Bizone kit
Bizone kit installed
Bizone system type
Add zone pump fixed PWM
Main zone pump fixed PWM
Mixing valve turning time
[9.9]
Power consumption control
Power consumption control
Type
Limit
Limit 1
Limit 2
Limit 3
Limit 4
Priority heater
BBR16 activation
BBR16 power limit
(*)
(*)
[9.5]
Emergency
Emergency
Compressor forced off
(*)
Only applicable in Swedish language.
INFORMATION
Solar kit settings are shown but are NOT applicable for this
unit. Settings shall NOT be used or changed.
INFORMATION
Depending on the selected installer settings and unit type,
settings will be visible/invisible.
