Daikin ERLA03DAV3, Installer'S Reference Manual, Page: 88 / 192

8 | Electrical installation
Installer reference guide
88
ERLA EHFZ03S18DJ3V
Daikin Altherma 3 R F
4P596821-1A – 2020.05
1 Top panel
1
2
3
2 Upper front panel
3 Upper switch box cover
3 Connect the domestic hot water pump cable to the appropriate terminals as
shown in the illustration below.
A
1~M M2P
B
A
B
1 2
X2M
4 Fix the cable with cable ties to the cable tie mountings.
8.3.7 To connect the alarm output
Wires: (2+1)×0.75 mm²
Maximum load: 0.3 A, 250 V AC
[A.2.2.6.3] Alarm output
1 Open the service cover. See "6.2.2 To open the outdoor unit" [ 4 42].
2 Open the following (see "6.2.4 To open the indoor unit" [ 4 43]):
1 Top panel
1
2
3
2 Upper front panel
3 Upper switch box cover
3 Connect the alarm output cable to the appropriate terminals as shown in the
illustration below.