background image

4 About the box

Installation manual

3

EKRTETS
Room thermostat
4P677092-1 – 2021.10

4

About the box

4.1

To unpack the room thermostat

a
b

d

g

h

c

e

f

a

Plugs and screws (for the room thermostat)

b

Plugs and screws (for the receiver)

c

Receiver

d

Batteries (for the room thermostat)

e

Room thermostat

f

Room thermostat holder

g

Installation manual

h

Operation manual

5

Preparation

5.1

Installation site requirements

▪ Do  NOT  install  the  room  thermostat  within  50  cm  of  any

appliances or devices that emit electronic or wireless signals.

▪ Do  NOT  install  the  room  thermostat  near  or  above  radiators  or

heat emitters.

▪ Mount the room thermostat at least 1.5 m from the ground.

▪ Mind the following spacing installation guidelines:

1.5 m

>0.2 m

When selecting the installation location of the receiver, also take into
account  the  following  recommendations  for  optimum  signal
reception:

▪ The receiver is designed to be installed indoors, typically close the

indoor unit.

▪ The  receiver  is  designed  to  be  installed  in  a  vertical  orientation

only.

▪ Do  NOT  install  the  receiver  in  metal  boxes  or  near  vertical  metal

pipes and electronic circuits.

▪ Mount the receiver at least 1.5 m from the ground.

6

Installation

6.1

To install the room thermostat

Wall-mounted installation

In case the optional external temperature sensor has been installed
as a floor temperature sensor, mounting the room thermostat to the
wall is required.

1

Only  in  case  of  external  temperature  sensor:  use  a  flathead
screwdriver to remove the connector from the back of the room
thermostat.

2

Insert  the  sensor  wiring  in  the  terminal  slots  and  tighten  the
screws with a flathead screwdriver.

3

Slide terminal block back onto the exposed pins on the back of
the room thermostat.

CAUTION

Do NOT pinch the wiring.

4

Open  the  battery  compartments  and  remove  the  battery
insulators.

Result: 

The screw holes become visible.

5

Drill  holes  in  the  wall  taking  the  dimensions  of  the  thermostat
into account and insert the supplied plugs in the holes.

6

Fasten  the  room  thermostat  to  the  wall  with  the  supplied
screws.

Summary of Contents for EKRTRB









Reviews: